Extension > Video Extenders
Download Data Sheet
Complete Product List
Receive Thinklogical News, Updates and Technical Notes
  • Supports one RGB video signal
  • Audio and serial port for A/V applications
  • 6.25 Gbps signal transmission via fiber optic cable no RF interference
  • Requires one or two fiber optic cables depending on application
  • Flawless image quality with no frame dropping
  • Extends RGB up to: - 350 meters using standard 50um multi-mode fiber - 1000 meters using eSX+ multi-mode fiber - 10 kilometers using single-mode fiber
  • Supports one RGB video signal
  • Audio and serial port for A/V applications
  • 6.25 Gbps signal transmission via fiber optic cable no RF interference
  • Requires one or two fiber optic cables depending on application
  • Flawless image quality with no frame dropping
  • Extends RGB up to: - 350 meters using standard 50um multi-mode fiber - 1000 meters using eSX+ multi-mode fiber - 10 kilometers using single-mode fiber

The Logical Solution - Video Extension

The Velocity RGB System 9 permits the placement of a analog monitor or projector from just a few meters up to 10 kilometers away from the controlling computer without loss of resolution. In addition to this standout capability and performance, the Velocity RGB 9 product line merges audio and serial technologies for A/V applications. This product give users an audio and serial port, which supports bi-directional stereo analog audio and RS-232 (two fibers required).

MRTS Technology - 6.25 Gbps. Allows for Full Frame Rate Signal Transmission

Powered by Thinklogical's cutting edge, patent-pending MRTS (Multi Rate Transmission System) technology, this digital video extension system transports every frame of a video stream seamlessly, with no compression, or dropped frames. In addition, all high speed peripherals function with no latency. Leveraging standard SFP+ transceivers, the system allows for the usage of either multi-mode or single-mode fiber optic cable.

The System

Each system consists of a transmitter and a receiver connected by multi-mode or single mode fiber optic cable. The transmitter unit connects to an analog video source with a suitable cable and the receiver unit provides connections to the display device. A +5V DC power supply is required on both the transmitter and receiver.

The Velocity RGB 9 requires two fibers. The transmitter supports RGB video formats up to 165MHz. In addtion, the Velocity RGB 9 has a local RGB video display port on the transmitter and is compatible with all Thinklogical Velocity fiber video receivers (except Dual-Link DVI versions), whether RGB or DVI. The receiver converts the video signal back from optical to RGB formats. Two receiver versions are available, a single RGB output and a dual RGB output. The Velocity RGB 9 receiver with dual RGB outputs is offered for distributing the video source to two displays, eliminating the need for an external distribution amp.

Additional Options
- Single-Mode over One or Two Fibers with SC/APC (Angle Polished Connector) or Neutrik® LC/APC Fiber Connectors to eliminate back reflections
- Multi-Mode over Two Fibers with LC, SC, ST or Neutrik® LC Fiber Connectors